BCI 1884SS Instrucciones de operaciones descargar pdf (Pagina 25)

Chapter 6: Trend Data

Pulse Oximeter for Sleep Screening Operation Manual 6-1

Chapter 6: Trend Data

Description

Whenever the monitor is on, it stores one SpO

and one pulse rate reading every 4 seconds.

The stored readings are called trend data. The monitor remembers trend data for at least 12

hours of run-time, possibly more, depending upon battery condition.

A summary of trend data can be printed on the built-in printer or stored data can be

downloaded to a computer.

Trend data will be preserved for about one and a half minutes, without battery power, allowing

battery replacement without losing trend data.

Clearing Trend Data

1. Turn the monitor off.

2. Press and hold the F key, then turn the monitor on. Do not release the F key.

3. clr will flash in the monitors’ display, while the F key is pressed.

4. When clr stops flashing, the trend data is cleared. Release the F key.

NOTE! Holding the F key for 6 to 8 seconds at power up will clear the trend data and

switch the unit into Verification Mode. See pg. 7-5 on use of F key for Paper Feed.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 42 43

Sin comentarios

BCI 1884SS Instrucciones de operaciones Pagina 25