BCI 1884SS Instrucciones de operaciones descargar pdf (Pagina 31)

Chapter 8: PC Communication Setup

Pulse Oximeter for Sleep Screening Operation Manual 8-1

Chapter 8: PC Communication Setup

Description

The device will send out Trend Data to a PC through the sensor connector. To accomplish

this, the sensor must be disconnected from the device. Additional cables are required to

connect the device to a PC. The communication device will be dormant if the system is not

in the Trend Printing Mode. The following items will be needed:

1. Printer Adapter Cable (Catalog No. 3350)

2. DB-9 Modem Cable (Catalog No.3339)

PC Communication Setup

1. Power up the monitor.

2. Connect the printer communication cable labeled “BCI” to the monitor.

3. Connect the standard RS-232 null modem cable’s DB-9 connector to the mating

connector of the printer cable labeled “Printer”.

4. Connect the standard RS-232 null modem cable's DB connector to the mating connector

on the PC.

NOTE! The DB-9 modem cable is an industry standard RS-232 null modem cable.

NOTE! SEE APPENDIX A FOR DATA FORMAT INFORMATION

Figure 8.1: PC Communication Setup

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 42 43

Sin comentarios

BCI 1884SS Instrucciones de operaciones Pagina 31